Material Origin
sulfur powder is obtained by smelting a Sulfur Block in a furnace or blast furnace.
1. Concentrated Sulfuric Sculk Block
-
Created by applying one Concentrated Sulfur Block directly onto a sculk block.
-
When it receives a redstone signal, it generates a frequency (1–15) based on the signal strength.
-
This frequency is transmitted through the entire sulfated sculk network.
2. Sulfated Sculk Base
-
Applying normal sulfur powder to sculk creates the Sulfated Sculk Base
-
the frequency comes only from the Concentrated Sulfuric Sculk Block
-
However, the base block does not automatically accept that frequency
-
It must be synchronized using an external redstone signal
-
The strength of the external redstone signal (1–15) determines which frequency the base block is allowed to accept
3. Sulfated Repeater
-
created by adding normal sulfur powder.
-
Each click increases the output redstone power (up to 15).
-
Works as a power‑adder repeater, enabling additive logic without large circuits.
4. Transmission Blocks
-
Mineral blocks placed next to sulfated sculk modify the number of ticks between pulses: for exmple
-
Amethyst −2 ticks
-
Copper −1 tick
-
5.Unwaxed Copper Lamp
-
Unwaxed redstone lamps are interfered with by sculk frequencies
-
When a frequency passes nearby, the lamp lights up for 1 tick
-
Only one face of the lamp lights up
-
A comparator placed on that face reads only that side
PS
-
Comparators attached to sulfated sculk activate instantly when the frequency reaches the block, ensuring fast and synchronized readings
Please sign in to leave a comment.
1 Comments